Cat5e And Cat6 Ethernet Patch Cable

Industrial drag chain Network Cable is based on the requirements of Patch Cable Cat5E and Cat6 Ethernet Patch Cable and other standards Ethernet Cable, and then according to the characteristics of industrial applications, the following are made Special enhancement:

1. High flexibility: The use of high-flexibility modified PVC sheath material improves the flexibility of the industrial towline cable, making it easier to wire in small cabinets or spaces.

2. High tensile strength and bending resistance: In many industrial application scenarios, the industrial Patch Cable is installed in the drag chain and moves back and forth with the drag chain. When the drag chain accelerates, the cable will have a greater impact on the cable. If the tensile strength of the cable is not high enough, the following possibilities will occur: the core wire is broken, the outer sheath is ruptured, or the outer sheath is elongated, thereby leading to Cause system failure. In drag chain applications, industrial drag chain cables can be bent with the drag chain to reciprocate and have a bending life of more than 8 million times.

3. Anti-interference performance: The industrial drag chain cable has a high-density tinned copper braided shielding layer, which has good electromagnetic shielding interference, no signal interference, no crosstalk and other defects.

4. Weather resistance: Industrial scenes are very different, some of the environment temperature is very high or very low, the industrial cable is required to have the ability to withstand high or low temperatures; some of the oil pollution is heavier, then Industrial cables are required to have good oil and corrosion resistance; some are installed outdoors and must be able to withstand sun, rain, and seawater erosion. In summary, the industrial drag chain network cable is by no means a substitute for ordinary network cables, and the selection of industrial Ethernet cables should also be based on the specific user requirements. It depends on the situation to decide which model to choose, so that is the most scientific and economical.

PRODUCT NAME	CONDUCTOR	JACKET	INSULATION	OD	CONDUCTOR RESISTANCE AT 20°C(Ω/KM,≤)	LENGTH
AWG	NO. OF PAIRS(mm)	MATERIAL
CAT5E SFTP	24AWG	7/0.20BC	OFC/CCA	PVC/LSZH	HDPE	6.2	84.2	1-30m
CAT5E SFTP	26AWG	7/0.16BC	OFC/CCA	PVC/LSZH	HDPE	6.0	135	1-30m
CAT5E SFTP	28AWG	7/0.12BC	OFC/CCA	PVC/LSZH	HDPE	5.2	214	1-30m

PRODUCT NAME	CONDUCTOR	JACKET	INSULATION	OD	CONDUCTOR RESISTANCE AT 20°C(Ω/KM,≤)	LENGTH
AWG	NO. OF PAIRS(mm)	MATERIAL
CAT6 SFTP	24AWG	7/0.20BC	OFC/CCA	PVC/LSZH	HDPE	7.5	84.2	1-30m
CAT6 SFTP	26AWG	7/0.16BC	OFC/CCA	PVC/LSZH	HDPE	6.5	135	1-30m
CAT6 SFTP	28AWG	7/0.12BC	OFC/CCA	PVC/LSZH	HDPE	5.7	214	1-30m

Key Features:

• 1. Frequency – 100 MHz
• 2. Transmission Speed – 1000BASE-TX
• 3. Available Length – 0.5M~30M or Longer
• 4. Connectors – Nickel Plated RJ45
• 5. Condcutor- 26AWG (America wire gague)
• 6. Cable Construction – Shielded SFTP
• 7. Jacket- PVC
• 8. Install – Used indoor, in-wall and in the ceiling

Applications:

Drag Chain, Industrial Machine, robot